11
2023
-
08
Chain saw how to operate the method of use broadcast
Chainsaw is short for "gasoline chain saw" or "gasoline-powered saw". It can be used for logging and lumbering. The cutting mechanism is the chain. The power part is the gasoline engine. It is easy to carry and relatively simple to operate.
Chain saw use operation steps:
1, first of all, start the chainsaw, remember not to pull the start rope to the end, or it will pull the rope off. When starting, pay attention to gently pull up the starting handle with your hand, after reaching the stop position, pull up quickly and forcefully, and at the same time press down on the front handle. Be careful also not to let the starting handle spring back freely, but control the speed by hand and guide it slowly back into the housing so that the starting rope can be coiled up.
2, Secondly, after a long run with the engine at maximum throttle, let it idle for a while to cool the air flow and release most of the heat. Avoid thermal overloading of components on the engine to trigger combustion.
3, again, if the engine power drops significantly, it may be because the air filter is too dirty inside. Remove the air filter and remove the dirt around it. If the filter is stuck by dirt, you can put the filter in a special cleaner or wash it with cleaning solution and then dry it. When installing the air filter after cleaning, check that the parts are correctly positioned.
Related news
Add:Shangma Industrial Zone, Luqiao District, Taizhou City, Zhejiang Province
E-mail:huijin@tzhuijin.com